Digital Gas Mass Flow Meter 0~10L/25L/Min Portable Gas Air Flow Rate Canopy

Description

Applications:
MF5706 is the use of oxygen, air, nitrogen gas, the gas to ensure dry, pure and free of impurities (if the gas is not pure and impurities
need to prepare filtration and drying equipment), 10L / min is measured from 0.2L, 25L / min is 0.5L from the test, 200L / min is measured
from 4L. Pressure does not exceed 0.8mpa. Output options: 485 (can be connected to the computer, line +30) or no output. Generally have
Notice:Before Make Payment, Please Kindly Check If You Have The Following Requirements Or Not, Otherwise The Item Maybe Destroyed:
1, The Gas Can Only Be Air, Oxygen, Nitrogen.
2, The Gas Needs To Be Dried And Remove Impurities To Keep The Gas Clean And No Impurities.
3, The Product Monitors The Instantaneous Flow And Cumulative Flow.
4, It cannot be used over the scope of use and pressure, the pressure is less than 8 kg and maximum withstand is 0.8mpa and operating temperaturis -10 degrees to 55 degrees.
5, you have to prepare the drying equipment and filters. And for 0-200, the start measure flow is 4L/min; for 0-25, the start measure flow is 0.5L/min;for 0-10, the start measure flow is 0.2L/min.
Please make sure the above requirements can be meet, thanks.
Features and Applications:
Ultra Low Power By Batteries Or Optional External AC Adaptor
Portable Design, Small And Easy To Install
MEMS Technology, Achieve Small Gas Flow Rate Testing, High Accuracy
RS485 Modbus Protocol Ready For Networking
User Programmable Range Alarm For Safety And Other Monitoring/Control Functionality
Specification:
Flow Range:0-10L/Min Or 0-25L/Min
Accuracy:± (2.0+0.5FS)%
Repeatability:0.5%
Response Time:≤ 2sec
Power Supply:4*AA Batteries(Not Included) or External AC Adaptor
Power Dissipation:≤ 10mW
Output:RS485
Display:LCD
Display Unit: Instant
Flow Rate:SLPM(L/min)
Flow Accumlation:NCM(m3)
Display Resolution: 0.01L/Min
Functions: Password Setting; Total Setting & Resetting; Alarm Function
Working Pressure: ≤ 0.8MPa
Working Temperature: -10 ～ +55℃
Pressure Loss: ≤ 600Pa
Continuous Working Time: > 60 days (With Batteries)
Standard Calibration Gas: Nitrogen, 20°C,  101.325kPa
User Interface: MINI USB
DN:6mm
Mechanical Connection:NPT 1/4
Note: Packaging Does Not Included Batteries.
Package included:
1 x Gas Mass Flow Meter Kit